Product ID:TIN/LEAD/ANTIMONY ALLOY:XM-200 CORE
MSDS Date:01/04/1993
FSC:3439
NIIN:01-372-3389
MSDS Number: BRGQN

GARDINER SOLDER CO, DIV OF GARDINER METAL CO

4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100/CHEMTREC 800-424-9300

Info Phone: 312-847-0100

Cage: 56244

GARDINER SOLDER CO, DIV OF GARDINER METAL CO

CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5- 94.3%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 5- 94.3%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.5% MAX

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN

CAS: 8050-09-7

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC: HEALTH STUDIES HAVE
SHOWN THAT POTENTIAL HEALTH RISKS MAY VARY BY INDIVIDUAL. ALWAYS
MINIMIZE EXPOSURE AS A PRECAUTION.
Effects of Overexposure:METALLIC TASTE IN THE MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITIONS.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS GET MEDICAL ATTENTION. SKIN: FLUSH WITH WATER. TREAT FOR
BURNS. GET MEDICAL ATTENTION. INHALATION: MOVE TO FRESH AIR.
SUPPORT RESPIRATIO N IF REQUIRED. GET MEDICAL ATTENTION. INGESTION:
DRINK LARGE AMOUNTS OF WATER. GET MEDICAL ATTENTION.

Flash Point:NON FLAMMABLE
Extinguishing Media:DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS ABOVE
1627F (886C).
Unusual Fire/Explosion Hazard:INCOMPLETE THERMAL DEGRADATION OF RESINS
ARE KNOWN TO GIVE OFF SMALL AMOUNTS OF FORMALDEHYDE.

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT MATERIAL. NEVER USE METHODS WHICH
GENERATE DUST.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE AWAY FROM OXIDIZING MATERIALS.
Other Precautions:AVOID CONTACT WITH FUMES AND DUST.

Respiratory Protection:WEAR NIOSH-APPROVED RESPIRATORY PROTECTIVE
EQUIPMENT WHEN EXPOSURE IS ABOVE TLV.
Ventilation:LOCAL EXHAUST PREFERRED, SPECIAL HEPA FILTERS REQUIRED.
MECHANICAL (GENERAL) IS OK.
Protective Gloves:HEAT RESISTANT GLOVES DURING SOLDERING.
Eye Protection:GOGGLES/FACE SHIELD DURING SOLDERING.
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:WASH AFTER USE AND BEFORE EATING, DRINKING, OR
SMOKING. FOLLOW GOOD INDUSTRIAL HYGIENIC PRACTICES.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1 @ 1626F
Spec Gravity:8.55 - 11.00
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY SOLID. ODORLESS.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 1627F (886C).
INCOMPLETE THERMAL DEGRADATION OF RESINS GIVE OFF SMALL AMOUNTS OF
FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.